Xeless - excellence in support services TecLog - excellence in industrial services
Encapsulated flat profile gaskets

revoseal revoseal JG/JP

The internationally patented geometry of outer and inner cogging completely encapsulates the graphite or PTFE layers. The tooth geometry has been calculated in such a way that even at using low quality bolts an ideal compression of the graphite layers and a double metallic sealing can be achieved. Therefore, Jungtec JG or JP (encapsulated flat profile gaskets) combine the advantages of metal and composite materials in an ideal way.

Highlights

  • The effective gasket width can be adapted in order to achieve optimum sealability in accordance to the Technical Instructions on Air Quality Control (TA-air), VDI 2290 according to DIN EN 1591.
  • Temperature: – 200°C to + 1000°C (dependent on the carrier material)
  • Pressure: from vacuum to 400 bar (1,500 lbs)
  • Lowest leakage rates of all gaskets available on the market
  • Standard material: 1.4571 (additional materials on request)
  • Total thickness 4.2 mm (additional thicknesses on request)
  • JG/JP profiles reproduce the tongue and groove principle
  • Fire Safe Certificate according to  API 607 (also for PTFE) and blow-out resistance according to VDI 2200

Product video JG/JP

  • Click double-arrow for full screen mode

#
revoseal JG/JP
Type Cross section Designation Download
JG/JP 1 revoseal JG/JP Encapsulated flat-profile gasket suitable for tongue & groove and male and female facings according to DIN EN 1514-4 TG and SR. Download PDF download PDF
JG 2 revoseal JG/JP Encapsulated flat-profile gasket with centring ring and predetermined breaking groove for raised face and full face flanges form A and B according to DIN EN 1092-1, as well as flanges according to ANSI B 16.5 / B 16.47-A and B 16.47-B. Download PDF download PDF
JP 2 revoseal JG/JP Encapsulated flat-profile gasket with centring ring and predetermined breaking groove for raised face and full face flanges form A and B according to DIN EN 1092-1, as well as flanges according to ANSI B 16.5 / B 16.47-A and B 16.47-B. Recommended for pressure higher than 200 bar and temperatures exceeding 500 °C. Download PDF download PDF
JP Top revoseal JG/JP JP TOP has the same properties as JP 2. In addition it has a secondary sealing of graphite or PTFE. This design is especially suited for cold chemicals building a corrosive medium in contact with air (atmosphere). Download PDF download PDF
Vario revoseal System Vario JG and JP gaskets are also available with our Vario-centering system (see revoseal system Vario). Download PDF download PDF

Further information and versions on demand.

By continuing to use the site, you agree to the use of cookies more informationen

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close