Embossed metal gasket

revoseal revoseal Eco+ / Visio

The Eco+ gasket consists of a solid stainless steel carrier covered on both sides with a narrow graphite or PTFE overlay. The Visio gasket consists of a solid stainless steel carrier with embossed inner and outer teeth and graphite or PTFE overlays on both sides. Towards the media side and, in the case of the Visio, also towards the atmosphere side, a resilient "tooth" is embossed to provide a metallic seal on both sides of the flange. The resilient "tooth" can absorb alternating forces caused by pressure and temperature fluctuations without plastic deformation. There is no need to retighten the bolts when starting up the system, as is the case with comb-profile gaskets, for example.

Highlights

  • Temperature: -270°C to + 500°C
  • Pressure range: from vacuum to 160 bar (900 lbs)
  • Over-achieves TA-Luft and VDI 2290 in connection with a leakage check according to EN 1591-1 (also at using screws of minor quality)
  • Standard material 1.4571 (additional materials on request)
  • Total thickness 1.6 mm (+/- 0.1 mm)
  • Fire Safe Certificate according to API 607 (also for PTFE) and blowout resistance according to VDI 2200



revoseal - awesome applications require awesome gaskets
revoseal - awesome applications require awesome gaskets
Eco+
Visio
revoseal - awesome applications require awesome gaskets

Eco+

Visio

Type Cross section Designation Download
Visio revoseal Visio The Visio consists of a solid stainless steel carrier with embossed inside and outside cog and graphite or PTFE layers on both sides. It is also suitable for tongue and groove, male and female facings and device flanges with webs. Owing to the flexible construction re-tightening of the flanges is no longer necessary also at strong pressure and temperature fluctuations. Download PDF download PDF
Eco+ revoseal Eco+ In traditional systems the Eco+ can be used as high-quality replacement for all kinds of flat gaskets up to 2 mm overall height. Due to the thin soft material layers, high surface pressures are already achieved at low bolt forces. At new constructions the Eco+ is the most cost-efficient and technically better alternative to serrated and spiral wound gaskets. Due to the resilient design, retightening of the screws is no longer necessary even at strong pressure and temperature fluctuations. Download PDF download PDF
Eco PU revoseal Eco+ The Eco PU has a PTFE-U–jacket with diffusion barrier. Therefore, it is best suited for aggressive media in plastic and enamel flanges. Even with low bolt torque forces high surface pressures can be realised. Download PDF download PDF
Eco Top revoseal Eco+ The Eco TOP has the same properties as the Eco+. It is, however provided with a secondary graphite layer with lower density or PTFE. The secondary seal prevents from flange corrosion as often seen with carbon steel flanges. Download PDF download PDF

Further information and versions on demand.

Products

Contact


Do you have questions, a request, or do you want to learn more about our products? We will support and advise you on your application. In addition to our own sealing concept, we also offer all kinds of standard seals at competitive prices. Just send us a message via our contact form. We will then get in touch with you as soon as possible. Your data is protected and encrypted via this form. We look forward to hearing from you!




#